For 1990-2009 cars only
Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provide an overview of each diagnostic category. |
Circuit/System Description
The rear seat audio (RSA) feature allows rear seat passengers to listen to a different audio program than the front seat passengers. When RSA is on the rear vehicle speakers are muted, and the rear passengers can select their own audio program to listen to using the headphones.
Reference Information
Schematic Reference
Radio/Navigation System Schematics
Connector End View Reference
Description and Operation
Radio/Audio System Description and Operation
Electrical Information Reference
Scan Tool Reference
Control Module References for scan tool information
Circuit/System Verification
Radio ON, verify clear audio is heard from each audio speaker with the RSA system OFF.
| ⇒ | If audio is inoperative from one or all speakers, refer to Speaker Malfunction . |
Circuit/System Testing
- Using a known good pair of wired headphones, plug them into both of the headphone jacks on the RSA controller.
- Radio ON, RSA ON, cylcle through several sources and listen for audio. Adjust appropriate volume control.
| ⇒ | If no audio is heard through the headphones, replace the RSA controller. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
| • | Control Module References for Amplifier and Radio replacement, setup, and programming |
