GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H2 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Brake Pedal Assembly Replacement

Removal Procedure

    Object Number: 375693 Size: SH
  1. Without disconnecting the electrical connector, remove the stop lamp switch. Refer to Stop Lamp Switch Replacement .
  2. Remove the nut from the brake pedal bolt.
  3. Remove the brake pedal bolt.
  4. Remove the brake pedal.

Installation Procedure

    Object Number: 375693 Size: SH
  1. Install the brake pedal.
  2. Install the brake pedal bolt.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the nut to the brake pedal bolt.

    4. Tighten
    Hold the nut stationary and tighten the brake pedal bolt to 47 N·m (35 lb ft).

  4. Install the stop lamp switch. Refer to Stop Lamp Switch Replacement .