GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H2 🢒 Transmission/Transaxle 🢒 Transfer Case - BW 4484 🢒 Transfer Case Speed Sensor Replacement

Removal Procedure

    Object Number: 860433 Size: SH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the electrical connector from the speed sensor.

    3. Object Number: 819577 Size: SH
  3. Remove the speed sensor and the O-ring from the transfer case.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 819577 Size: SH
  1. Install the new rear speed sensor into the transfer case with a new O-ring seal.

    2. Tighten
    Tighten the speed sensor to 17 N·m (13 lb ft).


    Object Number: 860433 Size: SH
  2. Install the electrical connector to the speed sensor.
  3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .