GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H2 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Support Cable Replacement

Removal Procedure

    Caution: Refer to Hood Hold-Open Device Caution in the Preface section.

  1. Open the hood.

    2. Object Number: 822819 Size: SH
  2. Remove the pin retaining the lower section of the cable to the hood by removing the retaining clip (1).

    3. Object Number: 861772 Size: SH
  3. Remove the pin retaining the upper section of the cable to the hood by removing the retaining clip (1).
  4. Remove the cable from the vehicle.

Installation Procedure

    Object Number: 822819 Size: SH
  1. Attach the lower section of the hood support cable to the hood by inserting the pin into the cable and installing the retaining clip (1).

    2. Object Number: 861772 Size: SH
  2. Attach the upper section of the hood support cable to the vehicle by inserting the pin into the cable and installing the retaining clip (1).
  3. Close the hood.