Rear Seat Heater Control Module Replacement. HUMMER H2 2008

For 1990-2009 cars only

Makes 🢒 HUMMER 🢒 2008 🢒 H2 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Rear Seat Heater Control Module Replacement

Rear Seat Heater Control Module Replacement SUV

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Replacement .
1	Rear Seat Heater Control Module Bolt (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
2	Rear Seat Heater Control Module Procedure Disconnect the electrical connectors. Refer to Control Module References for programming and set-up information.

Callout

Component Name

Remove the rear seat. Refer to Rear Seat Replacement .

Rear Seat Heater Control Module Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

Rear Seat Heater Control Module

Callout	Component Name
1	Rear Seat Riser Finish Cover Screw (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 3 N·m (25 lb in)
2	Rear Seat Heater Module Procedure Disconnect the electrical connector.

Callout

Component Name

Rear Seat Riser Finish Cover Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
3 N·m (25 lb in)

Rear Seat Heater Module

Disconnect the electrical connector.