GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H2 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Folding Rear Panel Harness Replacement

Removal Procedure
  1. Remove the midgate inner panel. Refer to Midgate Inner Panel Replacement .

    2. Object Number: 1427695 Size: SH
  2. Remove the lower interior center molding (4). Refer to Endgate Center Molding Replacement .
  3. Remove the midgate window. Refer to Midgate Window Replacement .
  4. Remove the midgate window regulator. Refer to Midgate Window Regulator Replacement .
  5. Remove the midgate latches. Refer to Midgate Latch Replacement .

    6. Object Number: 1412515 Size: SH
  6. Release the midgate wiring harness retainers from the midgate structure.
  7. Release the wire harness grommet from the midgate structure.
  8. Remove the midgate wiring harness from the midgate.

Installation Procedure

    Object Number: 1412515 Size: SH
  1. Position the midgate electrical harness to the midgate structure.
  2. Secure the midgate electrical harness grommet to the midgate structure.
  3. Connect the midgate harness connector to the main body harness.
  4. Secure the midgate harness grommet.
  5. Secure the midgate wire harness retainers to the midgate structure.
  6. Install the midgate latches. Refer to Midgate Latch Replacement .
  7. Install the midgate window regulator. Refer to Midgate Window Regulator Replacement .
  8. Install the midgate window. Refer to Midgate Window Replacement .

    9. Object Number: 1427695 Size: SH
  9. Install the lower interior center molding (4). Refer to Endgate Center Molding Replacement .
  10. Install the midgate inner panel. Refer to Midgate Inner Panel Replacement .