GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H2 🢒 Safety and Security 🢒 Seat Belts 🢒 Seat Belt Retractor Replacement - No. 1 Rear

Removal Procedure
  1. Remove the rear seat belt anchor belt.
  2. Remove the upper and lower body lock pillar garnish molding. Refer to Body Lock Pillar Garnish Lower Molding Replacement and Body Lock Pillar Garnish Molding Replacement - Upper.
  3. Route the belt through trim panel.

    4. Object Number: 833563 Size: SH
  4. Remove the bolt from the upper guide.
  5. Remove the bolt from the retractor.
  6. Remove the assembly from the vehicle.

Installation Procedure
  1. Install the assembly to vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bolt to the retractor.

    3. Tighten
    Tighten the bolt to 55 N·m (41 lb ft).

  3. Install the bolt to the upper guide.

    4. Tighten
    Tighten the bolt to 55 N·m (41 lb ft).


    Object Number: 833563 Size: SH
  4. Route the belt through trim panel.
  5. Install the upper and lower body lock pillar garnish molding. Refer to Body Lock Pillar Garnish Lower Molding Replacement and Body Lock Pillar Garnish Molding Replacement - Upper.
  6. Install the rear seat belt anchor bolt to bodyside panel.

    7. Tighten
    Tighten the bolt to 55 N·m (41 lb ft).

  7. Install the seat belt anchor bolt cover.