Preliminary Procedure

1. Remove front seat adjuster track finish covers. Refer to Front Seat Adjuster Track Finish Cover Replacement .
2. Disconnect the front seat retractor anchor by removing the nut. Refer to Seat Belt Retractor Pretensioner Replacement - Front .

1

Front Seat Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
55 N·m (41 lb ft)

2

Front Seat Nut (Qty: 2)

Tighten
55 N·m (41 lb ft)

3

Front Seat Assembly

Procedure

1. Remove the cover over the front seat electrical connector.
2. Disconnect the electrical harness.