Front Seat Cushion Outer Trim Panel Replacement. HUMMER H2 2008

For 1990-2009 cars only

Makes 🢒 HUMMER 🢒 2008 🢒 H2 🢒 Preface 🢒 Cautions and Notices 🢒 Front Seat Cushion Outer Trim Panel Replacement

Callout	Component Name
1	Front Seat Adjuster Outer Finish Cover Screw Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
2	Front Seat Adjuster Outer Finish Cover Procedure Squeeze the tabs in the rear of the cover together to disengage the outer trim cover from the rear trim cover. Pull outward to release the retainers from the seat assembly. Disconnect the electrical connectors. If replacing the finish cover, remove the switches and install on new finish cover.

Callout

Component Name

Front Seat Adjuster Outer Finish Cover Screw

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

Front Seat Adjuster Outer Finish Cover

Squeeze the tabs in the rear of the cover together to disengage the outer trim cover from the rear trim cover.
Pull outward to release the retainers from the seat assembly.
Disconnect the electrical connectors.
If replacing the finish cover, remove the switches and install on new finish cover.