Rear Seat Replacement without AL4

1. Fold the seat forward.
2. Grab the seat back cushion filler panels and pull up to release the clips.
3. Disconnect the electrical connectors, if equipped.
4. Remove the 3 covers that cover the nuts on the front of the seat frame.
5. Remove the seat retaining nuts.
6. Fold the seat cushions back to the closed position.



7. With the help of an assistant, remove the seat from the vehicle.

1. Install the seat into the vehicle.
2. Fold the seat cushions forward.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the seat retaining nuts.

Tighten
Tighten the nuts to 55 N·m (41 lb ft).

4. Install the 3 covers that cover the nuts on the front of the seat frame.
5. Connect the electrical connectors, if equipped.



6. Install the rear seat cushion filler panels by pushing downward to fully engage the clips.
7. Fold the seat cushion back to the closed position.