GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H2 🢒 General Information 🢒 General Information 🢒 Range Selector Lever Cable Replacement

Removal Procedure
  1. Position the transmission shift control lever to the park position.
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
  3. Ensure the transmission range selector lever is positioned to mechanical park.

    4. Object Number: 1971076 Size: SH
  4. Remove the range selector cable retaining clip  (2).
  5. Remove the range selector cable (3) from the range selector cable bracket (1) at the transmission.
  6. Remove the range selector cable (3) from the transmission range selector lever ball stud (4).
  7. Lower the vehicle and ensure that the shift lever is still in the park position.

    8. Object Number: 1967928 Size: SH
  8. Remove the console. Refer to Front Floor Console Replacement.
  9. Remove the range selector cable end (2) from the transmission shift control lever ball stud.
  10. Remove the range selector cable (1) from the transmission shift control lever housing.

    11. Object Number: 1971151 Size: SH
  11. Remove the range selector cable grommet (1) from the floor panel.
  12. Remove the range selector cable from the vehicle.

Installation Procedure
  1. Route the range selector cable through the hole in the floor panel.
  2. Ensure that the transmission shift control lever is in the park position.

    3. Object Number: 1971151 Size: SH
  3. Install the range selector cable grommet (1) to the floor panel.

    4. Object Number: 1967928 Size: SH
  4. Install the range selector cable (1) to the transmission shift control lever housing.
  5. Install the range selector cable end (2) to the transmission shift control lever ball stud.
  6. Install the console. Refer to Front Floor Console Replacement.
  7. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
  8. Ensure that the transmission range selector lever is in the mechanical park position.

    9. Object Number: 1971076 Size: SH
  9. Install the range selector cable (3) into the range selector cable bracket (1) at the transmission.
  10. Install the range selector cable retaining clip (2).
  11. Install the range selector cable (3) to the transmission range selector lever ball stud (4).
  12. Lower the vehicle.