Rear Tow Eye Replacement SUV

1. Remove the D-Ring mounting bolts.
2. Remove the D-Ring.

1. Install the D-Rings to the vehicle.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the D-Ring mounting bolts.

Tighten
Tighten the bolts to 85 N·m (63 lb ft).

Rear Tow Eye Replacement SUT

1. Open the spare tire carrier in order to access the rear tow eye bolts/nuts.
2. If replacing the hinge side, remove the spare tire carrier. Refer to Spare Tire Carrier Replacement .
3. Remove the nut from the tow eye bolt.
4. Remove the bolts holding the rear tow eyes (2, 3) to either the latch or hinge side of the spare tire carrier frame.
5. Remove the tow eyes.

1. Position the tow eye to either the latch (2) or hinge side (3) of the spare tire carrier.
2. Install the bolt.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the nut.

Tighten
Tighten the nut to 85 N·m (63 lb ft).

4. If replacing the hinge side, install the spare tire carrier. Refer to Spare Tire Carrier Replacement .
5. Secure the spare tire carrier to the rear bumper latch.