GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Remove the MID-Bussed Electrical Center from the bracket.

    3. Object Number: 606395 Size: SH
  3. Disconnect the park brake warning lamp switch connector.

    4. Object Number: 913316 Size: SH
  4. Remove the park brake warning lamp switch mounting bolt.
  5. Remove the park brake warning lamp switch.

Installation Procedure

    Object Number: 913316 Size: SH
  1. Install the park brake warning lamp switch.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the park brake warning lamp switch mounting bolt.

    3. Tighten
    Tighten the bolt to 3 N·m (25 lb in).


    Object Number: 606395 Size: SH
  3. Connect the park brake warning lamp switch connector.
  4. Install the MID-Bussed Electrical Center bracket.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.