GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Daytime Running Lamp Replacement

Removal Procedure

    Object Number: 802876 Size: SH
  1. Disconnect the electrical connector.
  2. Remove the nuts from the rear of the lamp assembly.
  3. Disengage the clips retaining lamp.
  4. Remove the lamp assembly.
  5. Remove the bulb socket by turning the socket counterclockwise.
  6. Remove the bulb.

Installation Procedure
  1. Install the bulb.
  2. Install the bulb socket by turning the socket clockwise.
  3. Install the lamp assembly.
  4. Engage the clips retaining the lamp.

    5. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 802876 Size: SH
  5. Install the nuts to the rear of the lamp assembly.

    6. Tighten
    Tighten the nuts to 6 N·m (53 lb in).

  6. Connect the electrical connector.