Isolator Compressor Automatic Level Control Air Replacement Dual Compressors

Warning: Do NOT remove an air supply pipe in an attempt to depressurize the air suspension. Always follow the Air Suspension Depressurization Procedure in Air Suspension. Failure to follow this procedure may cause personal injury or damage to the vehicle.

1. Remove the compressor assembly from the vehicle and place on a bench. Refer to Compressor Assembly Automatic Level Control Air Replacement.
2. Remove the mounting nuts (1).
3. Remove the mounting bolts (2).
4. Remove the isolators (3).

1. Install the isolators (3).
2. Install the mounting bolts (2).

Caution: Refer to Fastener Caution in the Preface section.

3. Install the mounting nuts (1).

Tighten
Tighten the nuts to 25 N·m (18 lb ft).

4. Install the compressor assembly to the vehicle. Refer to Compressor Assembly Automatic Level Control Air Replacement.