Front Axle Vent Hose Connector Replacement for HUMMER H2 2009

1. Raise the vehicle. Refer Lifting and Jacking the Vehicle.
2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement.



3. Disconnect the vent hose from the vent hose connector.



4. Remove the vent hose connector.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the vent hose connector.

Tighten
Tighten the vent hose connector to 20 N·m (15 lb ft).




2. Connect the vent hose to the vent hose connector.
3. Install the engine protection shield. Refer to Engine Protection Shield Replacement.
4. Lower the vehicle.