GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Side Reveal Molding Replacement

Removal Procedure

    Object Number: 870622 Size: SH
  1. Pull back the front door sealing weatherstrip to expose the windshield reveal molding screws.
  2. Remove the screws from the windshield reveal molding.
  3. Remove the windshield reveal molding from the windshield pillar.

Installation Procedure
  1. Install the windshield reveal molding to the windshield pillar.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 870622 Size: SH
  2. Install the screws to the windshield reveal molding.

    3. Tighten
    Tighten the screws to the windshield reveal molding to 2 N·m (18 lb in).

  3. Install the front door sealing weatherstrip (1) to the pinchweld.
  4. Close the door.