Note: Note the location of the wiper on the window before removal.

1. Disconnect the washer hose (4).
2. Swivel the wiper arm cover open (2).
3. Remove the nut (3) retaining the wiper arm to the wiper motor.
4. Remove the wiper arm from the liftgate.

1. Align the wiper arm to the vehicle by aligning the tip of the wiper to the locating mark (1) on the window.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the nut retaining the wiper arm to the wiper motor.

Tighten
Tighten the nut to 17 N·m (12.5 lb ft).

3. Swivel the wiper arm cover (2) closed.
4. Connect the washer hose (4).
5. Inspect the rear wiper for proper operation.