Preliminary Procedures

1. Remove the bezel instrument panel (I/P) center air outlet trim plate. Refer to Instrument Panel Center Air Outlet Bezel Replacement.
2. Remove the control assembly heater air conditioning (A/C). Refer to HVAC Control Module Replacement.

1

Radio Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Radio Assembly

Procedure

1. Disconnect the electrical connectors.
2. Disconnect the antenna cable.
3. Reprogram the radio after replacement. Refer to Control Module References.