Preliminary Procedure

Remove the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement.

1

Steering Wheel Trim Plate Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Steering Wheel Trim Plate (Qty: 2)

3

Radio Control Screw (Qty: 6)

Tighten
2 N·m (18 lb in)

4

Radio Control Switch Assembly

Procedure

1. Disconnect the electrical connector.
2. Make sure the steering wheel control switches are properly seated to the steering wheel trim cover during installation.