GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Lever Pedal Assembly Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.
  3. Remove the left side hinge pillar panel. Refer to Body Hinge Pillar Trim Panel Replacement - Left Side.
  4. Remove the MID-Bussed Electrical Center from the bracket.

    5. Object Number: 606395 Size: SH
  5. Disconnect the park brake warning lamp connection.

    6. Object Number: 376009 Size: SH
  6. Disconnect the park brake release cable from the park brake lever.

    7. Object Number: 793126 Size: SH
  7. Remove the park brake lever mounting nuts.

    8. Object Number: 913310 Size: SH
  8. Disconnect the front park brake cable from the park brake lever.
  9. Remove the park brake lever.

Installation Procedure

    Object Number: 913310 Size: SH
  1. Connect the front park brake cable to the park brake lever.

    2. Object Number: 793126 Size: SH
  2. Install the park brake lever.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the park brake lever mounting nuts.

    4. Tighten
    Tighten the nuts to 25 N·m (18 lb ft).


    Object Number: 376009 Size: SH
  4. Connect the park brake release cable to the park brake lever.

    5. Object Number: 606395 Size: SH
  5. Connect the park brake warning lamp connector.
  6. Install the MID-Bussed Electrical Center bracket.
  7. Install the left side hinge pillar panel. Refer to Body Hinge Pillar Trim Panel Replacement - Left Side.
  8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  9. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.