GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Release Handle Assembly Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.

    2. Object Number: 376009 Size: SH
  2. Remove the park brake release lever mounting bolt.
  3. Remove the park brake release lever handle from the knee bolster.
  4. Remove the MID-Bussed Electrical Center from the bracket.
  5. Remove the park brake release cable housing from the pedal assembly.
  6. Remove the park brake release cable from the pedal assembly.
  7. Note the routing of the cable as you remove the park brake release handle assembly from the vehicle.

Installation Procedure

    Object Number: 376009 Size: SH
  1. Install the park brake release handle assembly to the vehicle. Install the cable using the same routing as the original cable.
  2. Install the park brake release cable to the pedal assembly.
  3. Install the park brake release cable housing to the pedal assembly.
  4. Install the MID-Bussed Electrical Center to the bracket.
  5. Install the park brake release lever handle to the knee bolster.

    6. Caution: Refer to Fastener Caution in the Preface section.

  6. Install the park brake release lever mounting bolt.

    7. Tighten
    Tighten the bolt to 25 N·m (18 lb ft).

  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.