GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Cargo Tie Down Loop Bracket Replacement

Removal Procedure
  1. Open the spare tire carrier.
  2. Open the endgate.
  3. Cycle the midgate window to the full down/open position.
  4. Open the midgate.
  5. Release the midgate weatherstrip from the front edge of the cargo floor liner.

    6. Object Number: 1412532 Size: SH
  6. Remove the bolts (1) securing the cargo box loops and liner to the floor.
  7. Remove the cargo liner from the vehicle.
  8. Invert the cargo floor liner.

    9. Object Number: 1427854 Size: SH
  9. Remove the push-in retainers (2) from the bracket (3) and discard.
  10. Remove the bracket (3) from the floor liner (1).

Installation Procedure

    Object Number: 1427854 Size: SH
  1. Install the bracket (3) to the floor liner (1).
  2. Install the new push-in retainers (2).

    3. Object Number: 1412532 Size: SH
  3. Position the cargo box liner to the floor.
  4. Install the cargo tie down loops (2).

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the bolts (1).

    6. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  6. Reposition the midgate weatherstrip to the front edge of the cargo floor liner.
  7. Close the midgate.
  8. Cycle the window to the closed position.
  9. Close the endgate.
  10. Latch and secure the spare tire carrier.