1

Rear Side Door Inside Handle Bezel Finish Cover

2

Rear Side Door Pull Handle Cover

3

Rear Side Door Locking Rod Knob Assembly

Procedure

1. Ensure the locking rod is in the unlocked position.
2. Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
3. When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
4. Push the detent tab into the lock knob to locking rod.

4

Rear Side Door Trim Panel Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

5

Rear Side Door Trim Panel Assembly

Procedure

1. Use a door trim pad removal tool to aid in the removal of the trim panel.
2. Disengage the door lock cable.
3. Disconnect the electrical connectors.
4. Transfer parts as necessary.