GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Endgate Replacement

Removal Procedure
  1. Open the spare tire carrier.
  2. Open the endgate to a 45-degree angle.

    3. Object Number: 1486510 Size: SH
  3. Release both right and left hand cables from the side panel cable bolts.

    4. Object Number: 1428255 Size: SH
  4. Lift the right side endgate off the endgate trunnion (2).
  5. Remove the left side of the endgate off the left side trunnion.
  6. Place the endgate on a clean, dry surface.

    7. Object Number: 1428254 Size: SH
  7. Remove the following parts:
    8. • Lower trunnion
    • Endgate latch assembly (2)
    • Endgate handle bezel
    • Endgate handle/lock rods
    • Endgate cap
    • Endgate liner

Installation Procedure

    Object Number: 1428254 Size: SH
  1. Install the following parts:
    2. • Endgate liner
    • Endgate cap
    • Endgate handle/lock rods
    • Endgate handle bezel
    • Endgate latch assembly (2)
    • Both lower trunnions
  2. Position the left side of the endgate to the lower left trunnion.

    3. Object Number: 1428255 Size: SH
  3. At a 45-degree angle, set the right side onto the right lower trunnion (2).

    4. Object Number: 1486510 Size: SH
  4. Secure both cables to the side panel cable bolts.
  5. Close the endgate.
  6. Latch and secure the spare tire carrier.