GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Rear Door Opening Weatherstrip Replacement

Removal Procedure
  1. Open the door.

    2. Object Number: 862137 Size: SH
  2. Remove the weatherstrip (2) by pulling the weatherstrip off of the door opening pinch-weld flange (1).

Installation Procedure

    Object Number: 862137 Size: SH
  1. Starting at the top center of the door opening, install the weatherstrip (2) to the pinch-weld flange (1) and work down the right and left sides towards the bottom center, being careful not to stretch the weatherstrip during installation.
  2. Use a rubber mallet to ensure proper seating of the weatherstrip on the pinch-weld flange.
  3. Close the door.