Hood Handle Replacement for HUMMER H2 2009

1. Open the hood.
2. Remove the hood insulator. Refer to Hood Insulator Replacement.



3. Remove the fasteners (1) retaining the hood handle to the hood.
4. Remove the hood handle (2) from the hood.

1. Align the hood handle to the hood.

Caution: Refer to Fastener Caution in the Preface section.




2. Install the fasteners (1) retaining the hood handle to the hood.

Tighten
Tighten the fasteners to 9 N·m (80 lb in).

3. Install the hood insulator. Refer to Hood Insulator Replacement.
4. Close the hood.