Fuel Pump Flow Control Module Replacement. HUMMER H2 2009

For 1990-2009 cars only

Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Fuel Pump Flow Control Module Replacement

Callout	Component Name
Preliminary Procedure Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle.
1	Fuel Pump Flow Control Module Bolt (Qty: 3) Caution: Refer to Fastener Caution in the Preface section. Tip The bolts used are two headed and can be loosened from the module side, then maneuvered out of the slots. Tighten 9 N·m (80 lb in)
2	Fuel Pump Flow Control Module Procedure Disconnect the electrical connector. If replacing the fuel pump flow control module, program the control module. Refer to Control Module References.

Callout

Component Name

Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle.

Fuel Pump Flow Control Module Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tip
The bolts used are two headed and can be loosened from the module side, then maneuvered out of the slots.

Tighten
9 N·m (80 lb in)

Fuel Pump Flow Control Module

Disconnect the electrical connector.
If replacing the fuel pump flow control module, program the control module. Refer to Control Module References.