Preliminary Procedure

1. Remove front seat adjuster track finish covers. Refer to Front Seat Adjuster Track Finish Cover Replacement.
2. Disconnect the front seat retractor anchor by removing the nut. Refer to Seat Belt Retractor Pretensioner Replacement - Front.

1

Front Seat Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
55 N·m (41 lb ft)

2

Front Seat Nut (Qty: 2)

Tighten
55 N·m (41 lb ft)

3

Front Seat Assembly

Procedure

1. Remove the cover over the front seat electrical connector.
2. Disconnect the electrical harness.