Preliminary Procedures

1. Remove the rear inner wheelhouse panel. Refer to Wheelhouse Panel Replacement .
2. Remove the rear bumper. Refer to Rear Bumper Impact Bar Replacement .

1

Screws, Filler Extension Rear Bumper (Qty: 3)

Tip
Open the end gate to access the inside upper bumper extension filler screw.

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Bolts, Extension Rear Bumper Filler Lower (Qty: 2)

Tighten
9 N·m (80 lb in)

3

Bolts, Wheelhouse Opening Flare (Qty: 2)

Tighten
9 N·m (80 lb in)

4

Filler, Extension Rear Bumper (Qty: 1)

Tip
Pull front edge outward from under wheel opening flare and push filler extension rearward to remove.