Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Screws, License Plate Lamp (Qty: 2)

Tighten
2 N·m (18 lb in)

2

Connector, License Plate Lamp Assembly (Qty: 1)

Tip
Pull electrical harness slightly rearward to disconnect from socket.

3

Lamp Assembly - Rear License Plate (Qty: 1)

Tip
Hold socket and rotate lens counterclockwise to remove from socket.

4

Bulb, Rear License Plate Lamp (Qty: 1)

Tip
Hold socket and pull bulb straight outward.