Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the non functional air inlet grille panel. Refer to Non-Functional Air Inlet Grille Panel Replacement .
2. Open either the left or right front door and release the auxiliary weatherstrip up to the roof header to access the windshield side reveal molding screws.

1

Screws, Windshield Reveal Molding (Qty: 2)

Tip
Pull reveal molding forward to release the tabs from the integral retention clips.

Tighten
2 N·m (18 lb in)

2

Molding, Windshield Reveal