Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement .
2. Remove the blower motor. Refer to Blower Motor Replacement .

1

Screw, Air Outlet Duct - Rear Floor

Tighten
1.6 N·m (14 lb in)

2

Duct, Air Outlet - Rear Floor

3

Seal, A/C Evaporator Case

4

Screw, A/C Evaporator Case - Lower

Tighten
1.6 N·m (14 lb in)

5

Case, A/C Evaporator Lower

6

Baffle, Blower Motor Housing