•	Stoplamp, Taillamp and Turn Signal Lamp

•	Back-up Lamp

To replace one of these bulbs in the taillamp assembly, do the following:

1. Open the swing-gate. See Swing-gate for more information.

Passenger's Side Shown





Remove the two screws from the taillamp assembly.

2. Remove the taillamp assembly by pulling it to release the two locator pins. The locator pins connect the taillamp assembly to the vehicle's body.
3. Turn the bulb socket counterclockwise to remove it from the taillamp housing.
4. Replace with a new bulb.
5. Insert the bulb into the taillamp housing and turn it counterclockwise until it is locked into place.
6. Reinstall the rear lamp assembly by lining up the locator pins with the holes in the vehicle's body.
7. Reinstall the two screws.