Adm Msg - 2006 HUMMER H3 Speed Sensor Wire

Should you encounter an H3 with the ABS light on and in some cases, with DTC C0035 or C0040 set, check for chafing of one of the front wheel speed sensor wires as a result of contact with the wheel or tire and any loose or detached mounting clips. Replace any components as necessary. A favorable twist should be introduced in the wire prior to tie-strapping it to the upper control arm. The tie strap should be placed over the grommet on the wire. Care must be taken to allow enough free length in the wire for full articulation of the suspensions. Additional information relating to this condition can be found in SI document 1625488 and PI #PIT3608.