GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2006 🢒 H3 🢒 Bulletins 🢒 SMU - Revised Tow Hook Replacement - Front

SMU - Revised Tow Hook Replacement - Front

Subject:Revised Tow Hook Replacement - Front

Models:2006 HUMMER H3


This bulletin is being issued to revise the Tow Hook Replacement - Front procedure in the Frame and Underbody sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.

Tow Hook Replacement - Front
Object Number: 1558799 Size: SF

Callout

Component Name

1

Tow Hook Nut

Notice: Refer to Fastener Notice.

Tighten
50 N·m (37 lb ft) minus approximately 180 degrees

Tip
The nut should be tight enough to keep the hook from rattling against the bumper and loose enough to be moveable by hand.

2

Tow Hook Bolt

3

Tow Hook

4

Tow Hook Bracket Bolts (Qty: 2)

Tighten
85 N·m (63 lb ft)

Tip
It may be necessary to remove the bumper assembly to access additional bolts for the tow hook bracket. Refer to Bumper Replacement - Front.

5

Tow Hook Bracket