Caution: Refer to Fuel and Evaporative Emission Pipe Caution in the Preface section.

Caution: Refer to Gasoline/Gasoline Vapors Caution in the Preface section.

Notice: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice in the Preface section.

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
2. Disengage the quick connect fitting lock clip (1).
3. Disconnect the fuel feed line quick connect (2). Refer to Metal Collar Quick Connect Fitting Service .
4. Open the retaining clips (3, 4).
5. Remove fuel feed line from the clips.
6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
7. Disconnect the fuel feed line from the fuel tank. Refer to Plastic Collar Quick Connect Fitting Service .



8. If equipped with an automatic transmission, open the retaining clips attaching the lines to the transmission.
9. Remove the fuel feed line from the clips.



10. If equipped with a manual transmission, open the retaining clips attaching the lines to the transmission.
11. Remove the fuel feed line from the clips.

1. Install the fuel feed line to the clips.
2. If equipped with a manual transmission, close the retaining clips attaching the lines to the transmission.



3. Install the fuel feed line to the clips.
4. If equipped with an automatic transmission, close the retaining clips attaching the lines to the transmission.



5. Disconnect the fuel feed line from the fuel tank. Refer to Plastic Collar Quick Connect Fitting Service .
6. Lower the vehicle.
7. Install fuel feed line to the clips.
8. Close the retaining clips (3, 4).
9. Connect the fuel feed line quick connect (2). Refer to Metal Collar Quick Connect Fitting Service .
10. Engage the quick connect fitting lock clip (1).