GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H3 🢒 Engine 🢒 Engine Electrical 🢒 Starter Replacement

Removal Procedure

    Object Number: 1560047 Size: SH
  1. Remove the intake manifold. Refer to Intake Manifold Replacement .
  2. Remove the starter solenoid S terminal nut and disconnect the lead from the starter.
  3. Remove the starter terminal nut (1) and disconnect the positive battery cable (2) from the starter.

    4. Object Number: 1313646 Size: SH
  4. Remove the starter motor nut (1) and bolt (4).
  5. Remove the starter motor (3).

Installation Procedure

    Object Number: 1313646 Size: SH
  1. Position the starter motor (3) over the stud (2).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the starter motor nut (1) and bolt (4).

    3. Tighten
    Tighten the bolt/nut to 50 N·m (37 lb ft).


    Object Number: 1560047 Size: SH
  3. Connect the battery positive cable (2) to the starter and install the starter terminal nut (1).

    4. Tighten
    Tighten the nut to 9 N·m (80 lb in).

  4. Connect the lead to the starter solenoid and install the starter solenoid S terminal nut.

    5. Tighten
    Tighten the nut to 3.5 N·m (31 lb in).

  5. Install the intake manifold. Refer to Intake Manifold Replacement .