Removal Procedure
- Remove the fuel tank module. Refer to
Fuel Tank Module Replacement .
- Disconnect the fuel level sensor electrical connector (1) from the module
cover.
- Complete the following in order to remove the fuel
level sensor (1) from the module bucket:
| 3.1. | Disengage the locking tabs on the sensor. |
| 3.2. | Slide the sensor upward from the bucket. |
Installation Procedure
- Complete the following in order to install the fuel
level sensor to the module bucket.
| 1.1. | Align the edges of the sensor with the slots in the module bucket. |
| 1.2. | Slide the sensor down into position, ensure the locking tabs are fully
engaged. |
- Connect the fuel level sensor electrical connector
(1) to the module cover.
- Install the fuel tank module. Refer to
Fuel Tank Module Replacement
.
