Schematic Reference: Interior Lights Schematics

Connector End View Reference: Lighting Systems Connector End Views

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

Verify that the visor vanity mirror lamps are inoperative.

Do the visor vanity mirror lamps operate normally?

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

Connect a test lamp from the inadvertent power courtesy lamps supply voltage circuit above the headliner at the inoperative visor vanity mirror connector to ground. Refer to Circuit Testing .

Does the test lamp illuminate?

Go to Step 4

Go to Step 5

Connect a test lamp between the inadvertent power courtesy lamps supply voltage circuit and the ground circuit at the inoperative visor vanity mirror lamp connector. Refer to Circuit Testing .

Does the test lamp illuminate?

Go to Step 7

Go to Step 6

Repair the open, high resistance or short to ground in the inadvertent power courtesy lamps supply voltage circuit. Refer to Wiring Repairs .

Is the repair complete?

Go to Step 8

--

Repair the open or high resistance in the ground circuit. Refer to Wiring Repairs .

Is the repair complete?

Go to Step 8

--

1. Inspect the inoperative visor mirror bulb for an open filament and replace as necessary.
2. If the bulb is good, replace the sunshade. Refer to Sunshade Replacement .

Is the repair complete?

Go to Step 8

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3