Step | Action | Yes | No | ||||
|---|---|---|---|---|---|---|---|
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views | |||||||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |||||
2 | Verify that the marker lamps are inoperative. Do the marker lamps operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 | ||||
3 | Place the headlamp switch in the PARK position. Do the park lamps operate normally? | Go to Step 4 | |||||
4 | Inspect the inoperative bulb and socket for an open filament or poor terminal connections. Does any lamp have an open filament or poor terminal connections? | Go to Step 6 | Go to Step 5 | ||||
5 | Repair an open or high resistance in one of the following circuits:
Refer to Wiring Repairs. Did you complete the repair? | Go to Step 7 | -- | ||||
6 | Replace the defective bulb or repair/replace the socket. Refer to Front Side Marker Lamp Bulb Replacement. Did you complete the repair? | Go to Step 7 | -- | ||||
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 | ||||
