Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedure

Open the endgate in order to access the left rear taillamp assembly screws.

1

Screws, Tail Lamp Housing (Qty: 2)

Tip
Pull lamp housing outward in order to release the exterior side pin retainers.

Tighten
3 N·m (26 lb in)

2

Lamp Assembly, Tail

Tip
Disconnect the bulb sockets from the lamp housing by rotating counterclockwise.

3

Connector, Tail Lamp Electrical