Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Move the window to the full up position and secure in place with tape.
2. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Remove the armrest bracket. Refer to Armrest Bracket Replacement .

1

Bolt, Rear Side Door Window to Regulator (Qty: 2)

Tighten
10 N·m (89 lb in)

2

Bolt, Rear Side Door Window Regulator (Qty: 3)

Tighten
10 N·m (89 lb in)

3

Regulator Assembly, Rear Side Door Window

Tip
Disconnect the electrical connector.