Rear Brake Rotor Replacement. HUMMER H3 2007

For 1990-2009 cars only

Makes 🢒 HUMMER 🢒 2007 🢒 H3 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Rear Brake Rotor Replacement

Callout

Component Name

Caution: Refer to Brake Dust Caution in the Preface section.

Notice: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage to the brake hose and in turn may cause a brake fluid leak.

Preliminary Procedures

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .

Disc Brake Rotor Retainer (Qty: 2)

Brake Caliper Bracket Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Do NOT reuse the brake caliper bracket mounting bolts. Replace the bolts.

Tighten
135 N·m (100 lb ft)

Brake Caliper and Bracket Assembly

Tip

•	Position the brake caliper and bracket assembly aside and support with heavy mechanics wire or equivalent.

•	It is not necessary to disconnect the flexible brake hose.

Disc Brake Rotor

Tip

•	If the disc brake rotor will not slide over the park brake shoes, remove the rubber access plug on the backing plate and rotate the park brake shoe adjuster screw to provide clearance.

•	Burnish the brake pads and rotors. Refer to Brake Pad and Rotor Burnishing .