GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H3 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Rear Cable Replacement - Right Side

Removal Procedure
  1. Release the park brake.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    3. Object Number: 1557434 Size: SH
  3. Relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer and removing the right rear park brake cable from the equalizer bar.
  4. Remove the park brake cable from the frame bracket.

    5. Object Number: 1557448 Size: SH
  5. Remove the bolt (1) from the park brake cable clip.
  6. Remove the park brake cable from the frame brackets (2).

    7. Object Number: 1557468 Size: SH
  7. Remove the bolt from the park brake cable clip.

    8. Object Number: 1557412 Size: SH
  8. Remove the park brake cable from the cable bracket and the park brake lever assembly.

Installation Procedure

    Object Number: 1557412 Size: SH
  1. Install the park brake cable to the cable bracket and the park brake lever assembly.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1557468 Size: SH
  2. Install the bolt to the park brake cable clip.

    3. Tighten
    Tighten the bolt to 25 N·m (18 lb ft).


    Object Number: 1557448 Size: SH
  3. Install the park brake cable to the frame brackets (2).
  4. Install the bolt (1) to the park brake cable clip.

    5. Tighten
    Tighten the bolt to 25 N·m (18 lb ft).


    Object Number: 1557434 Size: SH
  5. Install the park brake cable to the frame bracket.
  6. Connect the right rear park brake cable by pulling down on the park brake cable in front of the equalizer and installing the right rear park brake cable to the equalizer bar.
  7. Adjust the park brake brake. Refer to Park Brake Adjustment .