Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedure

1. Remove the non functional air inlet grille panel. Refer to Non-Functional Air Inlet Grille Panel Replacement.
2. Open either the left or right front door and release the auxiliary weatherstrip up to the roof header to access the windshield side reveal molding screws.

1

Screws, Windshield Reveal Molding (Qty: 2)

Tip
Pull reveal molding forward to release the tabs from the integral retention clips.

Tighten
2 N·m (18 lb in)

2

Molding, Windshield Reveal