Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the rear wiper arm. Refer to Rear Window Wiper Arm Replacement .
2. Remove the jack stowage cover.
3. Remove the jack stowage tool kit.

1

Bolts, Rear Wiper Motor (Qty: 3)

Tighten
10 N·m (89 lb in)

2

Motor, Rear Window Wiper (Qty: 1)

Tip
Pull motor rearward to access washer hose and electrical connections, lower motor into endgate and remove from exterior pivot shaft grommet.