1

Rear Door Strut Rod Assembly

Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Notice: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.

Tip
Remove the metal clip at the ends of the assist rod, then pull away from stud.

2

Strut Rod Body Side Stud

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

3

Strut Rod Rear Door Side Stud

4

Strut Rod Stud Nut

Tighten
10 N·m (89 lb in)