Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the front wheelhouse opening flare. Refer to Front Wheel Opening Flare Replacement .
2. Remove the front wheelhouse panel. Refer to Wheelhouse Panel Replacement .
3. Remove the rocker panel molding. Refer to Rocker Panel Molding Replacement .
4. Remove air inlet grille panel. Refer to Non-Functional Air Inlet Grille Panel Replacement .

1

Bolts, Front Fender (Qty: 2)

Tighten
10 N·m (89 lb in)

2

Bolt, Front Fender (Qty: 2)

Tighten
10 N·m (89 lb in)

3

Bolt, Front Fender (Qty: 3)

Tighten
10 N·m (89 lb in)

4

Fender, Front Fender

Tip
On right side fender, remove the antenna mast. Refer to Fixed Antenna Mast Replacement .