1

Rear Seat Back Cushion Panel

Refer to Rear Seat Back Cushion Trim Panel Replacement .

2

Rear Seat Center Shoulder Belt Nut

Notice: Refer to Fastener Notice in the Preface section.

Tip
Move the rear seat cushion forward into the stowed position to gain access to the nut.

Tighten
52 N·m (38 lb ft)

3

Rear Seat Center Shoulder Belt Retractor Bolt

Tighten
52 N·m (38 lb ft)

4

Rear Seat Center Shoulder Belt Assembly

Tip

1. Use a flat-bladed screwdriver to separate the bottom of the seat belt from the anchor plate.
2. Loosen the top of the rear seat back cushion and cover enough to gain access to the retractor.
3. Feed the seat belt guide and belt through the opening in the seat back cushion and cover to remove.